Contact Us

 Metal Panel Contact Methods:

  metalpanel1 Toll-Free Number: 01 800 788 05 58     This email address is being protected from spambots. You need JavaScript enabled to view it.

Contact us



It is a structural profile type SSR (standing sean roof) manufactured on site with a roller for kr-18, with spiral binded joints at the ends. The kr-18 fixing system is based on hidden clips, reducing the risk of possible leaks since it is not required to drill the sheet for installation.




It is used in covers. It is recommended in slopes no greater than 60 m and slopes of no less than 2%.


It is fixed to the support structure (poles, joists, etc.) by means of fixed or mobile clips which are joined by self-drilling screws.



Covering power of 0.4572 meters. (18 in)

Camber: 6.3 cm (2.5 plg)

Finishes: Zintro, Zintro-alum and pintro.

Length: 3m minimum and 12m maximum,to facilitate transport, with rollers on site without limits.

Service to all Mexico.

KR-18 Additional Information



Technical Product Specification KR-18

KR-18 Maintenance Manual

Coating and Finishes

Ternium Corrugated Sheet Installation Manual

Video KR-18